Logo Tagline Phone Nnumber
Facebook
Off_Road_Header
#4000 $79.95
Buku Brake Bias Tool

A precision gauge for measuring the dynamic braking force of the front and rear brake mechanism.

Quick and easy test procedure produces accurate and realistic brake force measurements. Allows easily repeatable brake setups for measurable decreases in lap times and greatly improved handling characteristics

1/4" hex drive. Requires a drill or nut driver for use.

Optional custom name engraving also available. 2 lines up to 12 characters per line. Engraving will be all capital letters.
#4100 $84.95
Buku Brake Bias Tool with Engraving

Brake Bias Tool including Custom Engraving: 2 lines, 12 characters per line.

Once you have completed your order, send an email with the Order Number to contact@bukupower.com with the name you want engraved.

You must type the name twice (2 times). If the 2 versions of the name do not match we will need to contact you for clarification, potentially hold up your order!

All engraving will be in capital letters and the top and lower lines will be center justified to each other.
#34BX $54.00
34MM Brass Flywheel with Collet, 1/4-28 SG nut, Shims and Hex Wrench. Directly compatible with all Buku 1/8th scale components. Used to control wheel-spin in low traction conditions.
Does not include clutch shoes or springs.
#34B $44.00
34MM Brass Flywheel. Directly compatible with all Buku 1/8th scale components. Used to control wheel-spin in low traction conditions.
Flywheel only. Does not include shoes, springs, collet, nut, shims or wrench
#34R $39.00
NEW Recessed Flywheel for MBX 7.

34MM Recessed Flywheel. Directly compatible with all Buku 1/8th scale components. Used to provide additional clearance between the flywheel and the rear brake rotor.
Does not include clutch shoes, springs or hardware.
#32BX $54.00
32MM Brass Flywheel with Collet, 1/4-28 SG nut, Shims and Hex Wrench. Directly compatible with all Buku 1/8th scale components. Used to control wheel-spin in low traction conditions.
Does not include clutch shoes or springs.
#32B $44.00
32MM Brass Flywheel. Directly compatible with all Buku 1/8th scale components. Used to control wheel-spin in low traction conditions.
Flywheel only. Does not include shoes, springs, collet, nut, shims or wrench
#2000ABK-34 $79.00
1/8th Scale Clutch Kit with 34MM Flywheel and ABK Shoes. Complete kit with pre-assembled clutch, collet, SG style nut, hex wrench, shims and special Buku threadlocker.

The 34MM flywheel is the most common size for off-road vehicles. If you do not see your car listed specifically on this page the chances are you will need a 34mm flywheel.

Fits Losi, X-Ray, Mugen, (Associated), and most other 1/8th Scale Buggies and Truggies and monster trucks unless specifically listed elsewhere on this page.

Komposite shoes require use of a NEW clutch bell.
#2000-ABK-34R $79.00
NEW Recessed Flywheel Kit for MBX 7

1/8th Scale Clutch Kit with 34MM Recessed Flywheel and ABK Shoes. Complete kit with pre-assembled clutch, collet, SG style nut, hex wrench, shims and special Buku threadlocker.
#2000ABK-32 $79.00
1/8th Scale Clutch Kit with 32MM Flywheel and ABK Shoes. Complete kit with pre-assembled clutch, collet, SG style nut, hex wrench, shims and special Buku threadlocker.

Fits Kyosho

Komposite shoes require use of a NEW clutch bell.
#2000ABK-36 $79.00
1/8th Scale Clutch Kit with 36MM Flywheel and ABK Shoes. Complete kit with pre-assembled clutch, collet, SG style nut, hex wrench, shims and special Buku threadlocker.

Fits Durango

Komposite shoes require use of a NEW clutch bell.
#2000-34 $69.00
1/8th Scale Clutch Kit with 34MM Flywheel and Aluminum Shoes. Complete kit with pre-assembled clutch, collet, SG style nut, hex wrench, shims and special Buku threadlocker.
#2000-32 $69.00
1/8th Scale Clutch Kit with 32MM Flywheel and Aluminum Shoes. Complete kit with pre-assembled clutch, collet, SG style nut, hex wrench, shims and special Buku threadlocker.
#2000-36 $69.00
1/8th Scale Clutch Kit with 36MM Flywheel and Aluminum Shoes. Complete kit with pre-assembled clutch, collet, SG style nut, hex wrench, shims and special Buku threadlocker.
NOW AVAILABLE:
Replacement Components:
#2015ABK $29.95
1/8th Aluminum Bonded Komposite Shoes and standard springs. Fits all Buku 1/8th Scale flywheels.
#2015ABK-L $29.95
1/8th Light Aluminum Bonded Komposite Shoes and standard springs. Fits all Buku 1/8th Scale flywheels.
#2015ABK-H $29.95
1/8th Heavy Aluminum Bonded Komposite Shoes and standard springs. Fits all Buku 1/8th Scale flywheels.
#2015 $19.95
1/8th Aluminum Shoes and standard springs. Fits all Buku 1/8th Scale flywheels.
#2005 $7.95
1/8th Replacement Springs Stock Tension (standard on ABK and Aluminum kits)
#2200 $4.95
Assorted extra shims for clutch installation.
#2020 $4.95
Fits all Buku 1/8th Scale flywheels. (Does not fit Buku 1/10th Traxxas flywheels)
#2210 $4.95
1/4”-28 thread. Fits all SG cranks.
#TLPT $3.95
2ml Pen Tube of special Buku Threadlocker. Also available in 10ml bottle.
Footer 1
Footer 2 Footer 3 Footer 4 Buku